The Integrity Instruments ASC-2CH-2M Analog Signal Conditioner board is designed to operate with our 232M200 series of data acquisition modules. A DB15 connector mates with the module supplying power and signal paths which are available at a convenient terminal strip. Plus 5 vdc, as well as plus unregulated voltages are also provided at a terminal strip for external signal conditioning and use if required. Channel 0 and 1 have gain controlled amplifiers inputs.

The gain of the channel 0 and channel 1 amplifiers are controlled by a resistive value from pin 1 to pin 8 of the OP amp. The gain of each channel is separately controlled by jumpers on the board to provide gains of 1, 10, 100, and 1,000.

In addition jumpers can be installed for input signal load termination if required.

Or Call: 800-450-2001
8:00 A.M.- 5:00 P.M. Mon.-Fri. Central


Signal conditioner for M2 series
Click on image for larger view.