|
For 232M200 series see ASC-2CH-2M
The Integrity Instruments ASC-2CH Analog Signal Conditioner board is designed to operate with our line of data acquisition modules. A DB15 connector mates with the module supplying power and signal paths which are available at a convenient terminal strip. Plus and minus 5 vdc, as well as plus and minus unregulated voltages are also provided at a terminal strip for external signal conditioning and use if required. Channel 0 and 1 have gain controlled amplifiers suitable for thermocouple inputs and an onboard temperature sensor on channel 7 for terminal strip temperature compensation. Channels 2, 3, 4, 5 and 6 are available for other inputs.
The gain of the channel 0 and channel 1 amplifiers are controlled by a resistive value from pin 1 to pin 8 of the OP amp. The gain of each channel is separately controlled by jumpers on the board to provide gains of 1, 10, 100, and 1,000.
In addition jumpers can be installed for input signal load termination if required.
|
Or Call: 800-450-2001
8:00 A.M.- 5:00 P.M. Mon.-Fri. Central
Signal conditioner
Click on image for larger view.
|
|
|
Signal conditioner
| Electronic Documents In PDF Format |
 |
|
|
|
Technical Data
| Specifications - Signal conditioner |
| Number of Channels |
2 Op Amps, 1 On board Temperature Sensor
5 unconditioned |
| Mates to |
232M300, 485M300, USBM300 Series |
| Availiable voltages |
+Unreg, -Unreg, +5VDC, -5VDC, V Ref |
| Input means |
3.5mm Terminal Block |
Return to Serial Data Acquisition Add-on List
|
